User Manual of DS-7000HI-S Series Net DVR
Page 49
5.7 Mask Area Setup
In some cases, maybe you want mask the sensitive area. This area will not be preview and
recorded. The mask area setup steps are following:
Step 1: Enter “Image Setup” menu:
Step 2: Select one camera: You can use[][]keys to select one camera.
Step 3: Enter mask area setup interface: Enable the check box beside “Privacy Mask” item,
you can press[EDIT]key to change the flag into “”, and active “Area” button. Move “Active
Frame” to “Area” button on the right side of mask check box, press[ENTER]key to enter mask
area setup interface.
To Next Page
Loading...
Need help?
General