User Manual of DS-7000HI-S Series Net DVR
Page 48
5.6 Video Parameters Setup
For different camera and different background, in order to get the best video image, you need
to adjust video parameters such as brightenss, saturation, contrast and hue, etc.
You can setup the camera individually, and also you can copy the video parameters of one
camera to any other cameras. Here are the setup steps:
Step 1: Enter “Image Setup” menu:
Step 2: Select camera: Please use[][]keys to select one camera.
Step 3: Adjust brightness, contrast, saturation and hue: Move “Active Frame” to the
“Adjust” button on the right side of Brightness, Contrast, Saturation and Hue, press [ENTER]key,
you will enter the corresponding adjust interface. In the adjust interface, there is one scroll bar at
the bottom, you can use[][]keys to adjust and can find the video image will be changed at the
same time. When you are satisfied with the real time video image, press[ENTER]to return “Image
Setup” menu.
Step 4: You can copy the video parameters of current camera to any other cameras. Or you
can repeat setp2 and step3 to adjust for any other camera.
After adjust, in “Image Setup” menu, press “Confirm” button to save parameters and make
them become effective. Otherwise, perss “Cancel” button or[ESC]key to abort modification.
To Next Page
Loading...
Need help?
General