User Manual of DS-7000HI-S Series Net DVR
Page 53
5.9 Video Loss Alarm
When the video cable or camera has something wrong, the video image is lost. If you enable
video loss alarm, in such case, DVR will make alarm.
Step 1: Enter “Image Setup” menu:
Step 2: Select camera: Use[][]keys to select one camera.
Step 3: Enter “Video Signal Loss Handle” interface: Move “Active Frame” to the list box
on the right side of “Video Loss” item, use[]key to select “Handle” option and move “Active
Frame” to the “Policy” button on right side. Press[ENTER]to enter “Video Signal Loss Handle”
interface:
To Next Page
Loading...
Need help?
General