HIKVISION DS-7108HGHI-M1 User Manual

Table 3-2 Buon Descripon
Buon Descripon Buon Descripon
Adjust denion. Zoom in/out
playback image.
Turn on/o audio. Add tag.
Lock/unlock video. Clip video.
3.3 Event Playback
When you select the event playback mode, the system will analyze and mark videos that contain
the
moon detecon, line crossing detecon, or intrusion detecon informaon, .
Before You Start
●
Ensure the camera has enabled Dual-VCA. You can enable it via the camera web browser
interface in
Conguraon → Video/Audio → Display Info. on Stream .
●
Ensure your video recorder has enabled Save Camera VCA Data. You can enable it in
Conguraon → Record → Advanced .
Steps
1.
Go to Playback .
2.
Click Event.
3.
Select a camera.
4.
Posion the cursor on playback window to show control bar.
Table 3-3
Buon Descripon
Buon Descripon Buon Descripon
Add tag. Zoom in/out playback
image.
Clip video. Lock/unlock video.
Congure detecon
area.
Turn on/o audio.
5.
Click to set detecon areas of line crossing detecon, intrusion detecon, or moon
detecon.
6.
Click to search videos. Videos meet the detecon rule requirement will be marked in red.
7.
Click
to congure the play strategy.
Skip Normal Videos
If it is enabled, videos without smart informaon will not be played.
Normal Video
Digital Video Recorder User Manual
12

HIKVISION DS-7108HGHI-M1 Specifications

General

Brand	HIKVISION
Model	DS-7108HGHI-M1
Category	DVR
Language	English