HIKVISION DS-7108HGHI-M1 User Manual

Note
The Wi-Fi seng interface will automacally pop up when you insert the Wi-Fi dongle for the
rst me.
2.
Connect to a wireless network.
Connect to an Automacally
Searched Wireless Network
a. Double click the wireless network from the list as
you desired.
b. Set wireless network parameters.
c. Click OK.
Connect to a Customized Wireless
Network
a. Click Custom Adding.
b. Set wireless network parameters.
c. Click OK.
Connect to a Wireless Network with
WPS (Wi-Fi Protected Setup)
a. Click WPS Sengs.
b. Check Enable WPS.
c. Set wireless network parameters.
d. Click Apply.
Note
If you requires to edit or forget the network, double click the connected network, and edit it as
your desire.
Aer connecng to an available wireless network, you can view the connecon result in
Connecon Status.
3.
Go to Conguraon → Network → General → TCP/IP .
4.
Set Select NIC and Default Route as WLAN0.
5.
Check Enable Wi-Fi.
6.
Set other network parameters.
7.
Click Apply.
6.2.6 NTP
Your device can connect to a network me protocol (NTP) server to ensure that the system me is
accurate.
Steps
1.
Go to
Conguraon → Network → General → NTP .
2.
Turn on Enable.
3.
Enter the parameters.
Interval
Time interval between two
me synchronizaon with NTP server.
NTP Server
Digital Video Recorder User Manual
43

HIKVISION DS-7108HGHI-M1 Specifications

General

Brand	HIKVISION
Model	DS-7108HGHI-M1
Category	DVR
Language	English