HIKVISION DS-7108HGHI-M1 User Manual

Figure 5-3 Network
2.
Set network parameters.
DHCP
If the DHCP server is available, you can enable DHCP to automacally obtain an IP address
and other network sengs from that server.
Auto Obtain DNS
If DHCP is enabled. You can enable Auto Obtain DNS to automacally obtain Preferred DNS
Server and Alternate DNS Server.
3.
Click Apply.
5.2.2 Hik-Connect
Hik-Connect provides mobile phone applicaon and plaorm service to access and manage your
connected devices, which enables you to get a convenient remote access to the video security
system.
Steps
1.
Go to
Conguraon → Network → Hik-Connect .
2.
Turn on Enable. The service terms will pop up.
1) Read the service terms and privacy statement.
2) Check I have read and agree to Service Terms and Privacy Statement. if you agree with the
service terms and privacy statement.
3) Click OK.
3.
Click
to set vericaon code.
Digital Video Recorder User Manual
21

HIKVISION DS-7108HGHI-M1 Specifications

General

Brand	HIKVISION
Model	DS-7108HGHI-M1
Category	DVR
Language	English