3.
Follow the wizard to reset password.
5.1.3 Excepon
You can receive excepon events hint in alarm center, and set excepon linkage acons.
Steps
1.
Go to Conguraon → System → Excepon .
2.
Oponal: Congure event hint. When the set events occur, you will receive hints in alarm center.
1) Enable Event Hint.
2) Click
at the upper-right corner of local menu to enter alarm center.
3) Select an event type.
4) Click Set to select events to hint.
3.
Set
Excepon Type
4.
Select Normal Linkage type for
excepon linkage acons.
Figure 5-1 Excepon
5.
Click Apply.
Network Video Recorder User Manual
19