HIKVISION DS-7604NXI-K1/4P User Manual

6.8.4 Congure Storage Mode
Congure HDD Quota
Each camera can be congured with an allocated quota for storing videos.
Steps
Note
This funcon is only available for certain models.
1.
Go to Conguraon → Record → Storage Mode .
2.
Select a camera to set quota in Camera.
3.
Enter the storage capacity in Record Capacity.
Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
4.
Click Apply.
5.
Restart the video recorder to
acvate the new sengs.
6.8.5 Advanced
Sengs
Steps
1.
Go to Conguraon → Record → Advanced .
2.
Congure the parameters as your desire.
Overwrite
●
Disable: When the HDD is full, video recorder will stop
wring.
●
Enable: When hard drive is full, video record will connue to write new les by deleng the
oldest
les.
Save Camera VCA Data
Camera VCA data will be saved so that you can search it.
Note
Disabling Save Camera VCA Data will delete the exisng Dual-VCA and moon detecon
informaon, and stop analyzing and storing Dual-VCA and moon detecon informaon.
Alarm Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing alarm informaon.
Picture Storage
Network Video Recorder User Manual
84

HIKVISION DS-7604NXI-K1/4P Specifications

General

Brand	HIKVISION
Model	DS-7604NXI-K1/4P
Category	Network Hardware
Language	English