HIKVISION DS-7604NXI-K1/4P User Manual

It will send an email with alarm informaon when an alarm is triggered.
Trigger Channel
The selected channel(s) will start recording. It requires to congure the recording schedule
for the channel in Conguraon → Record → Schedule .
3.
Click Apply.
5.4 Device Access
5.4.1 Switch
Add and manage switches.
Quick Add Switch
Quick add switch(es) in the same network segment with the video recorder. If the switch is not
acvated, it will be added with the camera acvaon password.
Steps
1.
Go to Conguraon → Device Access → Switch .
2.
In the Online Device List, check the switch(es) to be added and click Add to add switch(es) in the
same network segment with the video recorder using the channel default password.
Add Switch Manually
Steps
1.
Go to Conguraon → Device Access → Switch .
2.
In the Added Device List, click Add and set the parameters of the device.
Table 5-1 Device Parameter
Descripon
Parameter Descripon
IP Address The IP address of the switch.
Management Port It is recommended to keep the default conguraon.
User Name / Password The user name / password of the switch.
Use Camera Acvaon
Password
Use the camera acvaon password of the video recorder to add
the switch.
3.
Click Add and Connue and repeat operaon unl all devices have been added.
4.
Click Add.
Network Video Recorder User Manual
30

HIKVISION DS-7604NXI-K1/4P Specifications

General

Brand	HIKVISION
Model	DS-7604NXI-K1/4P
Category	Network Hardware
Language	English