Network Video Recorder User Manual
113
Configure One-Key Disarming
The one-key disarming enables the device to disarm the alarm input 1 by one-key operation.
Go to System> Event>Normal Event>Alarm Input.
Select the alarm input1 item from the list and click .
Select the alarm input type to N.C or N.O.
Edit the alarm name.
Check the radio button of Enable One-Key Disarming.
One-Key Alarm Disarming
Select the alarm linkage action (s) you want to disarm for the local alarm input1.
When the alarm input 1 (Local<-1) is enabled with one-key disarming, the other alarm input
settings are not configurable.
Click Apply to save the settings.
Configure Alarm Output
Trigger an alarm output when an alarm is triggered.
To Next Page
Loading...
Need help?
General
