HIKVISION DS-96064NI-I16 User Manual

Network Video Recorder User Manual
76
Go to System > Event.
Configure the event detection and select the channel (s) to trigger the recording when event
occurs. Refer to Chapter 10 and Chapter 12 VCA Event Alarm for details.
Go to Camera > Encoding Parameters > Recording Parameters.
Set the event main stream/sub-stream recording parameters for the camera.
Go to Storage > Recording Schedule.
Select the recording type to Event.
Drag the mouse on the time bar to set the event detection recording schedule. Refer to Chapter
7.4 Configure Recording Schedule for details.
Configure Alarm Triggered Recording
You can configure the recording triggered by the motion detection, face detection, vehicle
detection, line crossing detection, etc.
Go to System > Event > Normal Event > Alarm Input.
Configure the alarm input and select the channel (s) to trigger the recording when alarm occurs.
Refer to Chapter 10 and Chapter 12 VCA Event Alarm for details.
Go to Camera > Encoding Parameters > Recording Parameters.
Set the event main stream/sub-stream recording parameters for the camera.
Go to Storage > Recording Schedule.
Select the recording type to Alarm
Drag the mouse on the time bar to set the alarm recording schedule. Refer to Chapter 7.4
Configure Recording Schedule for details.
Configure Picture Capture
The picture refers to the live picture capture in continuous or event recording type.
Go to Camera > Encoding Parameters > Capture.
Set the picture parameters.
 Resolution: set the resolution of the picture to capture.
 Picture Quality: set the picture quality to low, medium or high. The higher picture quality
results in more storage space requirement.
 Interval: the interval of capturing live picture.
 Capture Delay Time: the duration of capturing pictures.

HIKVISION DS-96064NI-I16 Specifications

General

Brand	HIKVISION
Model	DS-96064NI-I16
Category	Network Hardware
Language	English