Network Video Recorder User Manual
116
Exceptions Handling
Set the normal linkage and alarm output triggering. Refer to 11.2 Configure Alarm Linkage
Actions.
Alarm Linkage Actions
Purpose:
Alarm linkage actions will be activated when an alarm or exception occurs, including Event Hint
Display, Full Screen Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Trigger
Alarm Output and Send Email.
Configure Auto-switch Full Screen Monitoring
When an alarm is triggered, the local monitor displays in full screen the video image from the
alarming channel configured for full screen monitoring. And when the alarm is triggered
simultaneously in several channels, you must configure the auto-switch dwell time.
Go to System > View > General.
Set the event output and dwell time.
Event Output: Select the output to show event video.
To Next Page
Loading...
Need help?
General
