Fingerprint Time Attendance Terminal
102
2. Select the date and time period for calculation and click Calculate Attendance
Data to start calculating the attendance data.
3. After calculation, you can also export and import the attendance data.
4.5 Checking Status and Event
Purpose:
In this section, you are able to anti-control the status of the door and to check the
event report of the control point.
4.5.1 Status Monitor
Purpose:
You can anti-control the door status and check the real-time access event
information for the control point.
Click the icon on the control panel to enter the interface.
Access Anti-control
Purpose:
You can control the status for a single control point (a door) in this section.
Steps:
1. Enter the status monitor page.
2. Click on the icon on the Status Information panel to select a door.
3. Click on the button listed on the upper-left side of the Status Information panel
to select a door status for the door.
: Click on the button to open the door once.
: Click on the button to close the door once.
To Next Page
Loading...
Need help?
General
