Fingerprint Time Attendance Terminal
108
3. Select the operation type as System Configuration Logs.
4. Click the icon to specify the start time and end time.
5. Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.
Note: Please narrow the search condition if there are too many log files.
Searching Control Log
Searching Access Control Logs
Purpose:
The Access Control Log files of the Access Control System include door groups and
doors access control logs and door on/off control log files.
Steps:
1. Open the Log Search page.
2. Select the radio button of Control Logs.
3. Select the operation type as Access Control Logs.
4. Click the icon to specify the start time and end time.
5. Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.
Note: Please narrow the search condition if there are too many log files.
Log Search
Purpose:
The Log Search of the Access Control System include informations for configuration
log files and control log files.
Steps:
1. Open the Log Search page.
2. Select the radio button of Control Logs.
3. Select the operation type as Log Search.
4. Click the icon to specify the start time and end time.
5. Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.
Note: Please narrow the search condition if there are too many log files.
4.6.2 System Configuration
Purpose:
The general parameters, Auto Time Adjustment and Card Reader of the Access
Control System can be configured.
Click the icon on the control panel to open the System
Configuration page.
To Next Page
Loading...
Need help?
General
