Fingerprint Time Attendance Terminal
9
3.1.1 Activating via SADP Software
Purpose:
SADP software is used for detecting the online device, activating the device, and
resetting the device password.
Steps:
1. Get the SADP software from the supplied disk or the official website. Install
and run the software.
Note: Go to http://www.hikvision.com/en/tools_82.html to download the
SADP software.
2. Check the inactive device from the device list.
3. Create a password in the right side of the interface and confirm the password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case
letters, lower case letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can
better protect your product.
To Next Page
Loading...
Need help?
General
