HIKVISION DS-K1A801MF User Manual

Fingerprint Time Attendance Terminal
20
Notes:
 The upgrading file should be put in the root directory.
 The upgrading file name in the USB disk should be digicap.dav.
3.3.3 Setting Time
Purpose:
You are able to set the device time and the DST.
Steps:
1. Move the cursor to Time in the main interface.
2. Press the OK key to enter the Time interface.
3. Edit the parameters.
Date:
The displayed date on the device.
Time:
The displayed time on the device.
DST:
Select to enable or disable the DST. When the DST is enabled, you
can set the DST bias time, the start time and the end time.
 DST Bias: you can select 30min, 60min, 90min and 120min.
 Start: Set the start time of the DST.
 End: Set the end time of the DST.
4. Press the ESC key and select Yes to save the settings and exit the interface.
3.4 User Management
Purpose:
You are able to add, edit, delete and search the user.
Move the cursor to User in the main interface and press the OK key to enter the User
interface.

HIKVISION DS-K1A801MF Specifications

General

Brand	HIKVISION
Model	DS-K1A801MF
Category	Touch terminals
Language	English