Video Intercom Indoor Station·User Manual
73
Figure 9-9 Password Changing Interface
4. Enter the old password to change it.
5. Enter the new password and confirm it.
6. Press the tab to save the settings.
The default admin password (configuration password) is 888999;
The default unlock password and arm/disarm password are 123456;
The default duress code is 654321;
STRONG PASSWORD RECOMMENDED– We highly recommend you to create a
strong password of your own choosing (using a minimum of 8
characters, including at least three kinds of following categories:
upper case letters, lower case letters, numbers, and special characters)
in order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
10.3.2 Sound Settings
Purpose:
You can set the ringtone, ring duration, volume of microphone and loudspeaker,
enable/disable touch sound and auto-answer function on sound settings interface.
Steps:
1. Press the Settings tab and then the Sound Settings tab to enter the sound settings
interface.
To Next Page
Loading...
Need help?
General
