HIKVISION DS-KH9510-WTE1 Configuration Guide

DS-KH9510-WTE1 Video Intercom Indoor Station Configuration Guide
CG DS-KH9510-WTE1 Video Intercom 031621NA 22
Permission Password
1. Click Permission Password to enter password changing page.
Figure 21, Permission Password
2. For indoor station, you can change the admin password, arm/disarm password, unlock password and
duress code.
3. For indoor extension, only admin password and arm/disarm password need to be configured.
Zone Alarm
Steps
1. Click Zone Alarm to enter the zone settings page.
Figure 22, Zone Alarm
2. Select a zone type from the drop-down list menu.
3. Select an alarm mode from the drop-down list menu.
4. Set the zone status: NO or NC.
5. Set the entering delay, and exiting delay.
6. Select triggers.
7. Click Save to enable zone settings.
NOTE: Seven zone types are supported: Emergency Switch, Door Magnetic Switch, Smoke Detector,
Active IR Detector, Passive IR Detector, Combustible Gas Detector, and DoorBell Switch.
Three types of alarm mode are supported: Instant Alarm, 24H Alarm, and Delay Alarm.
When the zone type is set to be Instant Alarm, only under arming mode, the indoor station

HIKVISION DS-KH9510-WTE1 Specifications

General

Product type	Master station
Product color	White
Display resolution	1024 x 600 pixels
Brand compatibility	Hikvision
Quantity per pack	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C

Weight and Dimensions

Depth	166 mm
Width	254 mm
Height	26.65 mm