HIKVISION DS-KH9510-WTE1 Configuration Guide

DS-KH9510-WTE1 Video Intercom Indoor Station Configuration Guide
CG DS-KH9510-WTE1 Video Intercom 031621NA 10
Figure 7, Arming Mode Settings
3. Arm the selected zone.
• Zones are configurable on the arming mode page.
• 24H alarm zone including smoke detector zone and gas detector zone will be triggered even if
they are disabled.
• Arming mode settings should be configured with the settings of arming status on the user page
of the device.
1.3 Password Settings
You can edit the duress code, unlock password and arm/disarm password of the indoor station.
You can edit the arm/disarm password of the indoor extension.
Steps
1. Tap Settings → → Password to enter the password settings page.
Figure 8, Password Settings
2. Tap Unlock Password, Arm/Disarm, or Duress Code to pop up the password settings dialog box.
• Unlock Password: Enter the unlock password and room no. on the door station to open the door.
• Arm/Disarm: Create an arm/disarm password before configuring alarm parameters.

HIKVISION DS-KH9510-WTE1 Specifications

General

Product type	Master station
Product color	White
Display resolution	1024 x 600 pixels
Brand compatibility	Hikvision
Quantity per pack	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C

Weight and Dimensions

Depth	166 mm
Width	254 mm
Height	26.65 mm