Mobile Video Recorder User Manual
2
Chapter 2 Start up Device
2.1 Activation
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. The device supports multiple activation methods.
Note
Refer to the user manual of client software for the activation via client software.
2.1.1 Default Information
Device default IP address and user name are as follows.
● Default IP address: 192.168.1.64
● Default user name: admin.
2.1.2 Activate via Local Menu
You can activate the recorder via the local menu when it's connected to an external monitor.
Steps
1. Enter the same password in Password and Confirm Password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
2. Click OK.
2.1.3 Activate via SADP
SADP software is used for detecting the online devices, activating the devices, and resetting the
password.
Before You Start
● Get the SADP software from the official website, and install it according to the prompts.
● Ensure your computer and the device are in the same network segment.
To Next Page
Loading...
Need help?
General