Mobile Video Recorder User Manual
7
3.1.3 Edit IP Camera
You can visit, delete, and modify the added IP cameras.
Before You Start
If the device contains only one network card, you can visit IP camera via the device directly. If the
device contains dual network cards, you need to enable virtual host function before visiting IP
camera. Go to Configuration → Network → Advanced Settings → Other and check Enable Virtual
Host.
Steps
1. Go to Configuration → System → Camera Management.
2. Optional: Click address of IP camera to visit.
3. Optional: Check IP camera(s) and click Delete to delete the added IP camera(s).
3.2 Recording
To record the videos for connected cameras, you need to install a storage media and format it,
and configure the recording schedule.
3.2.1 Format Storage Media
A newly installed storage media must be initialized before it can be used.
Before You Start
Install a storage media.
Steps
1. Go to Configuration → Storage → Storage Management.
2. Check the storage media and click Format.
Result
After format, the storage media status should be Normal.
3.2.2 Configure Continuous Recording
The device is configured with all-day continuous recording by default.
Before You Start
Install and format the storage media.
Steps
1. Go to Configuration → Storage → Schedule Settings.
To Next Page
Loading...
Need help?
General