Mobile Video Recorder User Manual
34
Chapter 8 Driving Behavior Analysis
Driving behavior analysis is to analyze driver's behavior, including smoking, fatigue driving, phone
call, etc. The device will trigger warning when these behaviors are detected.
Note
Driving behavior analysis is only supported by some models. The actual device prevails.
8.1 Configuration
8.1.1 Configure Smart Driving Behavior
One recorder supports analyzing the smart device driving behavior of one channel once.
Calibrate Camera Position
Calibrate network camera position before enabling driving behavior detection.
Before You Start
Add the network camera to your device.
Steps
1. Go to Configuration → VCA → Driving Behaviors → IPC Position Calibration.
2. Select Channel No.
3. Adjust the network camera position to make the driver face image appear in the red frame, and
the safety belt image appear above the yellow line.
Figure 8-1 Calibrate Camera Position
To Next Page
Need help?
General