Mobile Video Recorder User Manual
36
8.2 Play Videos and Pictures
We take the example of playing videos to describe the steps.
Steps
1. Go to Playback.
2. Select a channel in channel list.
3. Click Event Search.
4. Select Event Type as Driver Behavior.
5. Set search conditions.
6. Click Search.
7. Select videos to play.
8.3 Link Driving Behavior Alarm
The device can trigger specific linkage method when the configured driving behavior is detected.
Before You Start
At least one of the following requirements should be met:
● The device supports smart driving behavior analysis, and the driving behavior parameters have
been configured.
● The device supports connecting smart terminal, and the smart terminal has been connected and
parameters have been configured.
Steps
1. Go to Configuration → Event → Basic Event → Driving Behaviors.
2. Select Channel No. and Driving Behaviors.
Note
● If the device supports smart driving behavior analysis, the selected channel should be the one
enabled smart driving behavior analysis.
● If the device supports smart terminal connection, the selected channel should be the one
connected to the smart terminal.
3. Check Enable.
4. Configure arming schedule. For detailed steps, refer to "Configure Arming Schedule".
5. Configure linkage method. For detailed steps, refer to "Configure Linkage Actions".
6. Click Save.
To Next Page
Need help?
General