Mobile Video Recorder User Manual
42
Chapter 10 Security
10.1 Manage User Account
You can add and delete users, and modify the password and permission of users.
Steps
1. Go to Configuration → System → User Management.
2. Click Add.
3. Edit new user parameters and click OK to create the user.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
4. Optional: Modify or delete the user information.
– Select a user and click Delete to delete the user.
– Select a user and click Modify to modify the user information.
10.2 Configure Security Question
If you forgot admin password, you can reset password by answering security questions. Follow the
steps to set security questions.
Before You Start
Your computer and recorder must be in the same network segment.
Steps
1. Go to Configuration → System → User Management.
2. Click Security Question.
3. Enter Admin Password.
4. Set security questions.
5. Click OK.
Result
If you forgot admin password, you can visit the recorder via computer in the same network
segment with your recorder and click Forgot Password to reset password.
To Next Page
Loading...
Need help?
General