Mobile Video Recorder User Manual
8
Figure 3-2 Configure Continuous Recording
2. Select Channel No.
3. Check Enable Record Plan.
4. Select recording type as Continuous.
5. Optional: Click Advanced to configure pre-record, post-record, and expired time.
Pre-record
The time you set to start recording before the scheduled time or the event. For example, if an
alarm triggers recording at 10:00, and the pre-record time is set as 5 seconds, the device
starts to record at 9:59:55.
Post-record
The time you set to stop recording after the scheduled time or the event. For example, if an
alarm triggered recording ends at 11:00, and the post-record time is set as 5 seconds, the
device records until 11:00:05.
Expired Time
The record can be deleted automatically after the configured expired time. If you enter 0, the
record will not be deleted. The record will be overwritten automatically if overwritten
recording is enabled.
6. Configure recording schedule. Refer to "Configure Arming Schedule" for details.
7. Optional: Click Copy to to copy upper settings to other channel(s).
8. Click Save.
To Next Page
Loading...
Need help?
General