HIKVISION iDS-2CD9396-AS User Manual

Network Traffic Camera • User Manual
25

The valid value range of MTU is 1280 to 1500.

The Multicast sends a stream to the multicast group address and allows multiple clients to
acquire the stream at the same time by requesting a copy from the multicast group
address. Before utilizing this function, you have to enable the Multicast function of your
router.

A reboot is required for the settings to take effect.
Configure Port
Purpose:
Configure the HTTP port, RTSP port, SDK port information to connect corresponding client.
Go to Configuration > Device Configuration > System Configuration > Port.
Port Configuration
Configure the following parameters.
 HTTP Port: The default port number is 80, and it can be changed to any port No. ranges from 1
to 65536 which is not occupied, except 21 (FTP port) and 23 (Telnet port).
 RTSP Port: The default port number is 554 and it can be changed to any port No. ranges from
1 to 65536 which is not occupied, except 21 (FTP port) and 23 (Telnet port).
 SDK Port: The default server port number is 8000, and it can be changed to any port No.
ranges from 2000 to 65535 which is not occupied.
Click Save to save the settings.
Configure HTTPS
Purpose:
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the following
steps to set the port number of https.

HIKVISION iDS-2CD9396-AS Specifications

General

Brand	HIKVISION
Model	iDS-2CD9396-AS
Category	Security Camera
Language	English