22
Installation RSPE 30/32/35/37
Release
12
10/2015
1.4 Power supply
You will find information on the characteristic values here:
“Device name and product code” on page 17
1.4.1 Supply voltage with the characteristic value K9
For the power supply of the device, a 3-pin terminal block is available.
For further information see “Supply voltage with the characteristic value K9”
on page 40.
1.4.2 Supply voltage with the characteristic value KK
For the redundant power supply of the device, two 3-pin terminal blocks are
available.
For more detail see “Supply voltage with the characteristic value KK” on
page 41.
1.4.3 Supply voltage with the characteristic value CC
For the redundant power supply of the device, two 2-pin terminal blocks are
available.
For further information see “Supply voltage with the characteristic value CC”
on page 43.
1.4.4 Supply voltage with the characteristic value PP
For the redundant power supply of the device, two 2-pin terminal blocks are
available.
These device variants support PoE(+).
Ensure that the external power supply unit you use to provide the PoE
voltage fulfills the insulation requirements according to IEEE 802.3
(insulation resistance 48 V, output to the “rest of the world” 750 V DC for
60 seconds).
For further information see “Supply voltage with characteristic value PP” on
page 44.
To Next Page
Loading...
Need help?
General
