Hirschmann RSPE 30 User Manual

Installation RSPE 30/32/35/37
Release 12 10/2015
25
 100/1000 Mbit/s F/O port
This port is an SFP slot.
The 100/1000 Mbit/s F/O port offers you the ability to connect network
components according to the IEEE 802.3 100BASE-FX/1000BASE-
SX/1000BASE-LX standard.
This port supports:
 1000 Mbit/s full duplex
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
State on delivery:
 100 Mbit/s full duplex when using a Fast Ethernet SFP transceiver
 1000 Mbit/s full duplex when using a Gigabit Ethernet SFP transceiver
1.5.3 100 Mbit/s F/O port (optional)
This port is an SFP slot.
This option is available to you, if you use a RSPM media module comprising
F/O ports.
The 100 Mbit/s F/O port offers you the ability to connect network components
according to the IEEE 802.3 100BASE-FX standard.
This port supports:
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
Default setting: Full duplex
Note: Insert the media module with 8 F/O ports only in the media module
slot 2.
See “Device views” on page 20.
You will find more information on the media modules in the “User Manual for
Installation of RSPM”.

Hirschmann RSPE 30 Specifications

General

Brand	Hirschmann
Model	RSPE 30
Category	Switch
Language	English