To Next Page

To Previous Page

Connecting to External Devices

Note:

• If you prefer to use Audio Return Channel/Enhanced Audio Return Channel, please refer to Connecting to

External Devices > Connecting a Digital Audio System with ARC/eARC in this manual.

•

You can connect the DIGITAL AUDIO OUT port on the back of the TV to the optical port on the amplifier.

Then go to > Settings > Display and sound > Audio Output > Digital Audio Output to choose

Dolby Audio - Dolby Digital to receive the Dolby Digital audio.

Connecting a Digital Audio System with ARC/eARC

If you would like to use the ARC(Audio Return Channel)/eARC(enhanced Audio Return Channel) feature to

send sound from the TV by a HDMI cable to a digital sound system, you can connect it to the HDMI (ARC/

eARC) port of your TV.

By using this feature, you can also control the sound system with your TV remote instead of using the remotes

for each device.

After the connection:

1. Power on the sound system.

Press button on your remote control to select Settings > Display and sound > Audio Output >

Audio Output > ARC/eARC

Note:

• Audio receiver must support ARC/eARC function.

• If the device has an Input Selector feature, then make sure to change it to TV.

• When this port is used for ARC function, it can be used as signal input when a DVD is connected to an

amplifier and the amplifier is connected to the TV at the same time. Some amplifiers may not support

series connection.

•

5.1 CH (channel) audio is available when the TV is connected to an external device that supports 5.1

channel surround sound. You can press button on your remote control to select Settings > Display

and sound > Audio Output > Digital Audio Output to choose Dolby Audio - Dolby Digital Plus to

receive the 5.1 channel audio.

Related information

Select Speakers on page 28

Hisense A6H User Manual

Questions and Answers: