Hisun Motors VECTOR 500 User Manual

OPERATING THE ENGINE 7-3
STOPPING THE ENGINE
1. After slowing the engine to idle, turn the key to
“OFF”.
2. Remove the key.
WARMING UP
CAUTION：
To avoid personal injury:
 Be sure to set the parking brake during
warm-up.
 Be sure to set the shift lever to the
“NEUTRAL” position during warm-up.
For 5 minutes after engine start-up, allow the
engine to warm up without applying any load. This
is to allow oil to reach every engine part. If load
applied to the engine without warm-up, troubles
such as seizure, breakage or premature wear may
occur.
■ Warm-Up Transmission Oil in the Low
Temperature Range
IMPORTANT:
 Do not operate the vehicle under full load
condition until it is sufficiently warmed up.

Hisun Motors VECTOR 500 Specifications

General

Brand	Hisun Motors
Model	VECTOR 500
Category	Utility Vehicle
Language	English