Hisun Motors VECTOR 500 User Manual

TROUBLESHOOTING 13-4
MACHINE TROUBLESHOOTING
Trouble
Cause
Countermeasure
Trouble shifting gears
 High idling speed of engine
 Replace throttle cable
 Replace throttle petal
 Replace the throttle
 High rotary speed for clutch
connection.
 Replace he junior clutch spring;
 Replace the primary clutch.
 Gearshift cable is out of
adjustment.
 Put the gearshift rod into the
position of “N”.
 Put the gearshift arm of engine
into ”N”.
 Adjust the shift cable and the bolt.
 Lock tightly.
 Gear abrasion
 Replace the gears
Transmission noise
 Poor clearance for the inner
and outside gears of
transmission shaft
 Replace the gears
 Poor clearance of transmission
gears.
 Replace the gears
 Poor connection of gear end
face
 Replace the gears
Reduced vehicle power
 Parking brake engaged
 Loosen the parking brake
 Hydraulic disc braking system
is activated
 Contact servicing dealer.
 CVT transmission sliding
 Removing the grease for the
clutch.
Replace CVT transmission belt
Servicing dealer to replace the
clutch.
Brake noise
 Insufficient brake oil
 Check the braking oil level
 Air inside the braking system.
 Contact servicing dealer.
 Brake discs abrasion
 Contact servicing dealer.
 Assembling bolt of disc plate
loose
 Lock tightly
 Assembling bolt for disc brake
clippers loose
 Lock tightly
If you have any questions, consult your local dealer.

Hisun Motors VECTOR 500 Specifications

General

Brand	Hisun Motors
Model	VECTOR 500
Category	Utility Vehicle
Language	English