PERIODIC SERVICE 11-2
3. Lower the lever to the “DOWN” position to
lower the bed.
4. After making sure that the bed has lowered to
the lowest position, lock it by the restricting
plate.
NOTE:
Pull up the cargo bed handle to raise the cargo
bed with the gas spring resistance
① Cargo bed release handle
② UP
③ DOWN
① Hydraulic cargo piston
JACK POINT
WARNING
To avoid personal injury, death or vehicle damage:
Do not work under the vehicle unless it is
secured by safe stands or suitable
blocking.
■ Front End
Jack up at the front bumper only.
① Jack ② Front frame support
■ Rear End
Jack up the rear after placing a wooden block
under the right and left vehicle frame for securing
vehicle.
Do not jack up the vehicle directly under the
engine.
① Jack ② Rear Frame support
To Next Page
Loading...
Need help?
General
