Hisun Motors VECTOR 500 User Manual

PERIODIC SERVICE 11-1
PERIODIC SERVICE
CAUTION:
To avoid personal injury:
■ HOW TO OPEN THE HOOD COVER
Cover AND TILT THE SEAT
CAUTION
To avoid personal injury from contact with
moving parts:
 Never open operator’s seat while the
engine is running.
 Support hood with the other hand while
unlocking support link.
■ Hood Box Cover
To Open/ Close
Unhook the hood latches, and then slowly tilt the
cover up. To close, tilt cover back to closed position
and fasten the latches.
① Hood box cover
■ Operator’s Seat
To open the seat, raise the seat to the forward
position.
① Operator’s seat
HOW TO RAISE THE CARGO BED
CAUTION
To avoid personal injury:
● When servicing under raised bed, make
sure safety support is properly mounted.
● Do not touch muffler or exhaust pipes while
they are hot; severe burns could result.
■ Raising and Lowering the Cargo Bed
◆ To raise the cargo bed
1. Apply the parking brake and start the engine.
2. Release the restricting plate.
3. Pull up the hydraulic lift cylinder lever to raise
the cargo bed.
4. When the cargo bed has been raised, return
the lever to the “NEUTRAL” position.
5. Stop the engine.
6. Mount the safety support.
◆ To lower the cargo bed
1. Start the engine and then lift the bed slightly by
operating the lever.
2. Remove the safety support and store it in the
given location.

Hisun Motors VECTOR 500 Specifications

General

Brand	Hisun Motors
Model	VECTOR 500
Category	Utility Vehicle
Language	English