1-51
Front control lever lock (1) is provided to prevent the machine
is unexpectedly operated even if the operator mistakenly
comes in contact with the bucket and/or lift arm control lever
when getting on or off the machine. When the lever lock is
placed to position (2), the front control lever becomes oper
-
able.
The armrest is used to support the operator’s arm so that the
arm force can be controlled when operating the loader control
lever. Turn the handle counterclockwise to lose the armrest
position. After setting the armrest to the desired position, turn
the handle clockwise to hold the armrest in that position.
5- Lose
6- Tighten
M4GB-01-050
M4GB-01-076
M4GB-01-077
UNLOCK LOCK
To Next Page
Loading...
Need help?
General
