Hitachi ZW250 User Manual


1-55


Switches (2), (3) stops the downward or upward lift arm at the
specified height.
    



  
 

  




Switch
SET (15 and 19): Presets the lift arm stop position.
ON (16 and 20): Stops the lowering lift arm at the specified
height.
OFF (17 and 21): Deactivate the lift arm auto leveler func
-
tion.
Presetting of lowering lift arm stop position
1. Hold the lift arm in the position at which the lowering lift
arm is desired to stop.
2. While deactivating lock switch (14) on lift arm auto lev
-
eler switch (lowering) (2), press SET side (15).
Presetting of raising lift arm stop position
1. Hold the lift arm in the position at which the raising lift
arm is desired to stop.
2. While deactivating lock switch (18) on lift arm auto lev
-
eler switch (raising) (3), press SET side (19).
M4GB-01-081
  



M4GB-01-082

 



Deactive
Deactive
Downward
Upward

Hitachi ZW250 Specifications

General

Brand	Hitachi
Model	ZW250
Category	Compact Loader
Language	English