Hitachi ZW250 User Manual


7-55
3. Loosen air bleed plug (4). Continue to press feed pump
(2) until fuel including no air bubbles flows out through
around the air bleed plug.
4. After air is bled, tighten air bleed plug (4). Press the feed
pump until it becomes hard to move.
5. Install the disk plate of feed pump (2) to the original posi
-
tion.
6. Start the engine. Check the fuel system for fuel leaks.
M4GF-07-011



Hitachi ZW250 Specifications

General

Brand	Hitachi
Model	ZW250
Category	Compact Loader
Language	English