Version 1.0, 11/2017. Copyright 2012 Hitron Technologies
17
Version 1.0, 11/2017. Copyright 2017 Hitron Technologies
17
Hitron E31N2V1 User’s Guide
1.6 Logging in to the E31N2V1
Take the following steps to log into the E31N2V1’s GUI.
1 Open a browser window.
2 Enter the E31N2V1’s IP address (default 192.168.100.1) in the URL bar. The
Login screen displays.
Figure 5: Login
3 Enter the Username and Password. The default user name is technician and
the default password is PoD Tool.
NOTE: The Username and Password are case-sensitive; “password” is not the same
as “PASSWORD”.
4 If you want to use a language other than English, select it from the Language
dropdown.
5 If you want to log in without entering the password in future, select Remember
me on this computer. Only select this on your own, private computer (not
public computers, or those easily-accessible by others).
6 Click Login. The System Information screen displays (see The Status: System
Information Screen on page 26).
1.7 GUI Overview
This section describes the E31N2V1’s GUI.
To Next Page
Loading...
Need help?
General
