Version 1.0, 11/2017. Copyright 2012 Hitron Technologies
43
Version 1.0, 11/2017. Copyright 2017 Hitron Technologies
43
Hitron E31N2V1 User’s Guide
2
Troubleshooting
Use this section to solve common problems with the E31N2V1 and your network. It
contains the following sections:
None of the LEDs Turn On on page 43
One of the LEDs does not Display as Expected on page 44
I Forgot the E31N2V1’s Admin Username or Password on page 44
I Cannot Access the E31N2V1 or the Internet on page 44
Problem: None of the LEDs Turn On
The E31N2V1 is not receiving power, or there is a fault with the device.
1 Ensure that you are using the correct power adaptor.
Using a power adaptor other than the one that came with your E31N2V1
can damage the E31N2V1.
2 Ensure the power adaptor is connected to the E31N2V1 and the wall socket (or
other power source) correctly.
3 Ensure that the power source is functioning correctly. Replace any broken fuses
or reset any tripped circuit breakers.
4 Disconnect and re-connect the power cable to the power source and the
E31N2V1.
5 If none of the above steps solve the problem, consult your vendor.
To Next Page
Loading...
Need help?
General
