Honda ADV150 2019 User Manual

Overheating (High coolant temperature indicator is on)
The engine is overheating when the following
occurs:
● High coolant temperature indicator
comes on.
● Acceleration becomes sluggish.
If this occurs, pull safely to the side of the
road and perform the following procedure.
Extended fast idling may cause the high
coolant temperature indicator to come on.
NOTICE
Continuing to ride with an overheated engine
can cause serious damage to the engine.
1. Stop the engine using the ignition switch.
2. Allow the engine to cool with the ignition
switch in the
(Off) position.
3. After the engine has cooled, inspect the
radiator hose and check if there is a leak.
2 P. 93
If there is a leak:
Do not start the engine. Transport your
vehicle to your dealer.
4. Check the coolant level in the reserve
tank. 2 P. 93
u Add coolant as necessary.
5. If 1-4 check normal, you may continue
riding, but closely monitor the high
coolant temperature indicator.
20191017191217_32K0WC000_eng_BOOK Page 109 Thursday, October 17 2019 19:17:25 JST
Troubleshooting
106

Honda ADV150 2019 Specifications

General

Displacement	149.3 cc
Bore x Stroke	57.3 mm x 57.9 mm
Compression Ratio	10.6:1
Fuel System	PGM-FI (Programmed Fuel Injection)
Ignition System	Full Transistorized Ignition
Starting System	Electric
Front Suspension	Telescopic Fork
Front Brake	Hydraulic Disc
Rear Brake	Mechanical Drum
Front Tire	110/80-14
Rear Tire	130/70-13
Length	1, 950 mm
Width	763 mm
Height	1, 153 mm
Seat Height	795 mm
Wheelbase	1, 324 mm
Ground Clearance	165 mm
Curb Weight	133 kg
Engine Type	Liquid-cooled, 4-stroke, SOHC
Transmission	Automatic, V-Matic
Rear Suspension	Twin Shock
Fuel Tank Capacity	8.0 L