Honda ADV150 2019 User Manual

Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat
tyre, can be a major inconvenience.
Check the following items before you get on
your vehicle:
● Fuel level - Fill fuel tank when necessary.
2 P. 59
● Throttle - Check for smooth opening and
full closing in all steering positions. 2 P. 98
● Engine oil level - Add engine oil if necessary.
Check for leaks. 2 P. 89
● Coolant level - Add coolant if required.
Check for leaks. 2 P. 93
● Brakes - Check operation;
Front and Rear: check brake fluid level and
pads wear. 2 P. 95, 2 P. 96
● Lights and horn - Check that lights,
indicators and horn function properly.
● Side stand ignition cut-off system - Check
for proper function. 2 P. 97
● Wheels and tyres - Check condition, air
pressure and adjust if necessary. 2 P. 77
20191017191217_32K0WC000_eng_BOOK Page 74 Thursday, October 17 2019 19:17:25 JST
Maintenance
71

Honda ADV150 2019 Specifications

General

Displacement	149.3 cc
Bore x Stroke	57.3 mm x 57.9 mm
Compression Ratio	10.6:1
Fuel System	PGM-FI (Programmed Fuel Injection)
Ignition System	Full Transistorized Ignition
Starting System	Electric
Front Suspension	Telescopic Fork
Front Brake	Hydraulic Disc
Rear Brake	Mechanical Drum
Front Tire	110/80-14
Rear Tire	130/70-13
Length	1, 950 mm
Width	763 mm
Height	1, 153 mm
Seat Height	795 mm
Wheelbase	1, 324 mm
Ground Clearance	165 mm
Curb Weight	133 kg
Engine Type	Liquid-cooled, 4-stroke, SOHC
Transmission	Automatic, V-Matic
Rear Suspension	Twin Shock
Fuel Tank Capacity	8.0 L