Name: Honda BF15D
Brand: Honda
Rating: 5 (1 reviews)

To Next Page

To Previous Page

BF15DmBF20D

SILENCEWCARBURETOR

REMOVAL

Before removal, drain the gasoline

a suitable container

from the carburetor by loosening the drain screw.

Gasoline is highly flammable and explosive.

You can be burned or seriously injured when handling

fuel.

Keep heat, sparks, and flame away.

Handle fuel only outdoors.

Wipe up spills immediately.

1) Remove the engine cover and right engine under cover

Open the tube clip (Electric starter type only) and discon-

nect the crankcase breather tube from the silencer.

Check the breather tube for deterioration, cracks or

other damage. Clean or replace if necessary.

(P.

5-3).

Disconnect the

thermal valve wire connectors and

remove the wire from the holders on the starter case B

(Electrical starter type).

4) Disconnect the drain tube from the starter case B.

Remove the

14 mm flange bolt and remove the throt-

tle cable holder, and then disconnect the throttle cable

pivot linkage from the throttle lever (Tiller handle type).

[2]

TUBECLIP

[l]

BREATHERTUBE

[3]

THROlTLE LEVE

6-2

Other manuals for Honda BF15D

Questions and Answers:

Need help?

Do you have a question about the Honda BF15D and is the answer not in the manual?

General