547
uuMaintenance Minder
TM
uTo Use Maintenance Minder
TM
Reset the Maintenance Minder display if you have performed the maintenance
service.
1. Turn the ignition switch to ON (w and have
the vehicle at a complete stop.
2. Display the Maintenance Minder by
repeatedly pressing the (TRIP) knob.
3. Press and hold the knob for 10 seconds
or more.
u The display will blink to show it is in reset
mode.
4. Rotate the knob to select the item you
wish to reset.
u Reset the selected item by pushing the
knob for five seconds or more.
■
Resetting the Display
Failure to reset the Maintenance Minder
TM
display
after a maintenance service results in the system
showing incorrect maintenance intervals, which can
lead to serious mechanical problems.
The dealer will reset the Maintenance Minder
TM
display after completing the required maintenance
service. If someone other than a dealer performs
maintenance service, reset the Maintenance
Minder
TM
display yourself.
17 CR-V-31TLA6000.book 547 ページ ２０１６年１２月１５日 木曜日 午後４時２７分
To Next Page
Loading...
Need help?
General
