Honda CR-V 2017 User Manual

591
uuBatteryuCharging the Battery
Maintenance
Charging the Battery
Disconnect both battery cables to prevent damaging your vehicle's electrical system.
Always disconnect the negative (–) cable first, and reconnect it last.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
1Battery
When you find corrosion, clean the battery terminals
by applying a baking powder and water solution.
Clean the terminals with a damp towel. Cloth/towel
dry the battery. Coat the terminals with grease to
help prevent future corrosion.
When replacing the battery, the replacement must be
of the same specifications.
Consult a dealer for more information.
The indicators for the Adaptive Cruise Control (ACC)
with Low Speed Follow (LSF)
*
, Road Departure
Mitigation (RDM) System
*
, Electric Power Steering
(EPS) system, Vehicle Stability Assist (VSA®) system,
VSA® OFF, Collision Mitigation Braking System
TM
(CMBS
TM
)
*
, and low tire pressure/Tire Pressure
Monitoring System (TPMS)
*
may come on when you
turn the ignition switch to ON
(w
*1
after re-
connecting the battery.
Drive a short distance at 12 mph (20 km/h). The
indicator should go off. If it does not, have your
vehicle checked by a dealer.
* Not available on all models
17 CR-V-31TLA6000.book 591 ページ ２０１６年１２月１５日 木曜日 午後４時２７分

Honda CR-V 2017 Specifications

General

Brand	Honda
Model	CR-V 2017
Category	Automobile
Language	English