OPERATION
49
STARTING AND STOPPING THE ENGINE with Bluetooth® ENABLED
SMARTPHONE
The engine can be started/stopped via a Bluetooth® enabled smartphone using
a Bluetooth® application.
Refer to the Bluetooth® application to check the connection, operation, and for
help pairing a smartphone.
HOW TO RESTART WHEN STOPPED BY CO-MINDER (CO SHUT-OFF SYSTEM)
When the engine is automatically stopped by the CO-MINDER, move the
generator to an area with fresh air and away from any device that may be
emitting carbon monoxide, such as another generator. Press the CO-MINDER
reset button and then follow the standard procedure for starting the engine.
When the CO ALARM indicator or the FAULT/CO-MINDER LIFE indicator flashes,
press the CO-MINDER reset button to turn off the indicator.
However, even if the CO-MINDER reset button is pressed and the CO ALARM
indicator turns off, the engine cannot be started remotely using the remote
control kit (optional part) or the Bluetooth® connection unless the engine is
started using the engine switch on the generator once.
When the remote control is connected, turn the MAIN switch on remote control to
the ON position and then restart the engine. If the MAIN switch on remote control is
in the OFF position, using the engine switch on the generator will crank the engine,
but the engine will not start.
CO-MINDER RESET BUTTON
CO ALARM INDICATOR
FAULT/CO SENSOR LIFE
INDICATOR
To Next Page
Loading...
Need help?
General
