OPERATION
58
DC OPERATION
The DC receptacle should ONLY be used for charging 12-volt automotive type
batteries. The DC charging output is not regulated.
Connecting the battery charging cable (optional equipment):
1. Before connecting the battery charging cable (optional equipment) to a
battery that is installed in a vehicle, disconnect the vehicle battery ground
cable from the negative (–) battery terminal.
WARNING: Battery posts, terminals, and related accessories contain lead and
lead compounds. Wash your hands after handling.
2. Connect the red lead of battery charging cable into the positive (+) DC
terminal of the generator.
The battery gives off explosive
hydrogen gas during normal operation.
A spark or flame can cause the battery to
explode with enough force to kill or
seriously hurt you.
Wear protective clothing and a face
shield, or have a skilled mechanic
perform the battery maintenance.
POSITIVE DC TERMINAL
(RED)
NEGATIVE DC TERMINAL
(BLACK)
BATTERY NEGATIVE (–)
TERMINAL
BATTERY POSITIVE (+)
TERMINAL
To Next Page
Loading...
Need help?
General
