OPERATION
56
AC Receptacle Selection
The control panel, shown below, has a voltage selector switch and four
receptacles. Receptacle 4, the 240-volt receptacle, has two powered terminals,
4A and 4B.
Power Producing Circuits
This generator is equipped with two power generating circuits.
When the voltage selector switch is in the 120V/240V position, each of the two
power producing circuits supplies power to specific receptacles.
When the voltage selector switch is in the 120V ONLY position, the power
producing circuits operate in parallel, sharing the total load connected to
terminal 4A and receptacles 1, 2, and 3.
VOLTAGE SELECTOR
SWITCH
TERMINAL
RECEPTACLE
TERMINAL
RECEPTACLE
RECEPTACLE
GFCI RECEPTACLE
(120 V 20 A DUPLEX RECEPTACLE)
RECEPTACLE
GFCI RECEPTACLE
(120 V 20 A DUPLEX RECEPTACLE)
POWER
CIRCUIT B
POWER
CIRCUIT A
120 V/240 V 120 V ONLY
POWER CIRCUIT B
POWER CIRCUIT A
To Next Page
Loading...
Need help?
General
