Honda Forza NSS300 2013 User Manual

64
Maintenance
Spark Plug
Checking & Changing Spark
Plug
For the recommended spark plug, see
“Specifications.” 2 P. 109
Use only the recommended type of spark
plug in the recommended heat range.
1. Place your scooter on its centre stand on
a level surface.
2. Pull the floor mat off.
3. Remove the screw.
4. Remove the plug maintenance lid by
inserting a flat head screwdriver covered
with a protective cloth into the slit on the
floor.
NOTICE
Using spark plugs with an improper heat range can cause
engine damage.
Floor mat Screw
Slit
Protective
cloth
Plug
maintenance
lid

Honda Forza NSS300 2013 Specifications

General

Displacement	279 cc
Compression Ratio	10.5:1
Fuel System	PGM-FI electronic fuel injection
Ignition	Computer-controlled digital transistorized with electronic advance
Transmission	Automatic V-Matic belt drive
Front Tire	120/70-14
Rear Tire	140/70-13
ABS	Optional
Engine Type	Liquid-cooled, 4-stroke, single-cylinder
Front Suspension	33mm telescopic fork
Rear Suspension	Twin shock
Front Brake	Single 256 mm disc
Rear Brake	Single 240mm disc
Wheelbase	60.9 inches
Seat Height	28.2 inches
Width	29.7 inches
Curb Weight	192 kg (423 lbs)