5.3.5 FITTING THE PROTECTION DEVICES AT THE EXIT (GRASS-CATCHER OR STONE-GUARD)
Never use the machine without having fitted the protec-
tion devices at the exit!
The protection devices must be fitted with
the tipping levers lowered.
Attach the grass-catcher inserting the upper
tube of the frame into the slots of the 2 brack-
ets (1).
Make sure that the lower tube of the opening
of the grass-catcher hooks onto the pawl (2).
If the hook is too stiff or too loose, adjust the
return spring (☛ 6.3.6)
If you would like to mow without using the grass-
catcher, an optional stone-guard kit (☛ 8.2) is avail-
able on request. This has to be attached to the rear
plate as indicated in the relevant instructions.
5.3.6 C
HECKING THE EFFECTIVENESS OF THE SAFETY DEVICES
Check that the safety systems are working properly by simulating the various situ-
ations of usage listed (☛ 5.2) and making sure that the indicated result is
achieved for each situation..
5.3.7 C
HECKING THE BLADES
Check that the blades are sharpened properly and firmly fixed to their hubs.
– A badly sharpened blade pulls at the grass and causes the lawn to turn yellow.
– A loose blade causes unusual vibrations and can be dangerous.
Wear heavy gloves when handling the blades.
!
WARNING!
HF2•••HTE
➤
!
WARNING!
EN 26 HOW TO USE
To Next Page
Loading...
Need help?
General
