MVCI System Setup
From the User Config menu, select MVCI Setup, then press ENTER.
These options are available:
• Clock
• Contrast Control
• Font Size
• Wireless
• SDMEM Format
• Factory Defaults
Clock
If you want to change the time, date and date format of the MVCI, select View and Set, then press ENTER.
To change the Calendar Data format, highlight Format, then press ENTER. Use the up/down buttons to change
the Calendar Data format. Press ENTER to save the changes, or press ESC to cancel.
To change the date, highlight the date, and press ENTER. Use the up/down buttons to change the number and the
left/right buttons to move between the month, the day, and the year fields. Press ENTER to save the changes, or
press ESC to cancel.
To change the time, highlight the time, then press ENTER. Use the up/down buttons to change the number and
the left/right buttons to move between the hours, the minutes, and the seconds fields. Press ENTER to save the
changes, or press ESC to cancel.
NOTE: The time is in 24 hour format.
20
To Next Page
Loading...
Need help?
General
