SDIO-2
The SDIO-2 slot has the MVCI wireless card inserted. It allows the MVCI to communicate on a wireless network.
NOTE: Do not remove the MVCI wireless card unless a problem has occurred.
To view the status of the SDIO-2 slot, select View Status, then press ENTER.
The status screens appear. Scroll down to see all status items.
These screens are for information only. You cannot change the settings on these screens. Press ESC to return to
the previous menu.
Battery Charger
This screen indicates if the MVCI batteries are being charged. You cannot change this setting.
NOTE: To extend the battery life, the MVCI stops charging the batteries when the MVCI’s internal temperature is
140°F (60°C) or more. Battery charging continues after the MVCI is rebooted and the temperature is below 140°F
(60°C).
Host Status
This item displays the IP address of the PC that is communicating with the MVCI. If the PC is not actively
communicating with the MVCI, the status appears Inactive.
35
To Next Page
Loading...
Need help?
General
